
Coming home with your hands full? A solar wall light by the side entrance illuminates the last few steps as you approach in motion mode.

Put a fixture where a change in level catches you by surprise after dark, like the last step down from the deck.

Check where the sun falls before you pick an installation point. An eave, leafy branch, or tall fence can shade the built-in panel and reduce nighttime run time.
Start with the spots you pass most often.





Pick a mode, then simulate someone approaching.


Check the width of your mounting surface and allow room for the solar panel to face the sun unobstructed.
| Included | 4 individual solar motion sensor wall lights |
|---|---|
| Approximate size | 5.3 × 3.9 in per fixture (13.5 × 9.9 cm) |
| Power | Integrated solar panel on each fixture |
| Finish | Black housing with four angled LED faces |
| Modes | Motion only · Dim + motion · Steady low |
| Placement | Exterior walls or posts with direct sunlight |
| Run time | Varies with sun exposure, selected mode, and frequency of activation |
There are four individual fixtures per set. Each one has its own solar panel and lighting mode control.
Each fixture runs on solar power, so you can install it away from an outlet.
Check if direct sunlight can reach the solar panel. If the panel is shaded for much of the day, consider a sunnier wall or post.
Choose motion only if you want the lamp to stay off until you approach. Use dim + motion for a low background light that brightens as you arrive.
About 5.3 inches wide and 3.9 inches high.
Run time depends on solar charging and the selected mode. Frequent triggering can shorten it.
Start at the spot you use most after dark. Test a light there before mounting the remaining fixtures.
Four solar fixtures for the gate, door, path, and steps you use every night.
See the 4-Packloading